YY-Electron Wireless Home Security Alarm System Manual de Serviço descarregar pdf (Página 15)

Wireless RC

Controllers,

Relay Receivers

and Oasis Relay Receivers

The module is able to communicate with JA-8x

series control panels, wireless detectors and RC-8x

remote controls. In combination with JA-8x con-

trol panels its output state copies the control

panel programmable outputs. The output relay

can be operated in various modes (according to

the enrolled device): 1s impulse, 2min. impulse,

toggling on/off… The receiver can also signal

the panic state of an enrolled device, tamper-

ing and a low battery. The UC-82 can be used

for the interfacing of wireless detectors to the

wired inputs of non-Jablotron control panels.

The UC-82 has its own housing tamper.

Communication band 868 MHz

Voltage 10 - 14 V DC

approx. 20 mA stand by consumption

Communication range

with JA-80 detectors approx. 300 m

with RC-8x remote controls approx. 50 m

Relays output load max. 2 A/24 V DC or 2 A/120 V AC

Low bat. output max. 100 mA/24 V

TMP output max. 100 mA/24 V

Coding digital floating code

Dimensions 76 x 110 x 33 mm

This product complies with ETSI EN 300220,

ETS 300683, and EN 60950

The AC-88 is a wirelessly controllable intel-

ligent socket switching mains appliances

(230V/50Hz/16A) such as boilers, electrical

heaters, lighting, ventilation etc. The internal

mains relay can be controlled by the unit’s

own switch, Oasis RC-8x remote controls, JA-8x

detectors, TP-8x wireless thermostats, and the

wireless PG output signals from the JA-8xK

control panels, GD-04 David units and EYE-02 security cameras (8 wireless control channels).

The unit can toggle its output, or switch on for a given time (1 minute to 24 hours). The AC-88 also has a built

in transmitter, by which a chain of slave AC-88s or other Oasis system devices (AC-82, UC-82, GD-04R wireless

relays or JA-8xK control panels with JA-82R radio modules) can be formed so that the status of the master AC-88

can be copied by all other enrolled devices.

Communication band 868 MHz

Voltage 230 V/50 Hz, safety class II Ω

Consumption approx 1 W

Contact relay load resistive max.16 A/250 V AC

inductive max. 8 A/250 V AC

Enrolled devices up to 8

Environment II. indoor general (-10 to +40 °C)

Dimensions 64 x 91 x 45 mm

AC-88 Smart Wireless Socket

This receiver is able to communicate with JA-8x

control panels, wireless detectors, TP-8x wire-

less thermostats and RC-8x remote controls.

It is powered by 230 V AC and has two output

relays. In combination with JA-8x control panels

its output state copies the control panel pro-

grammable outputs. Connection with JA-80

detectors enables you to automate some opera-

tions in your premises such as turning on a light

by activating a detector, controlling ventilation

etc. The output relay can be operated in several

modes (according to the type of enrolled detec-

tor): 1s impulse, 2min. impulse, toggling on/off... The receiver can also signal the panic state of enrolled devices

and tamper activation. Thanks to the highly-rated relay output contacts it is suitable for house automation

e.g. light switching, ventilation and other devices.

Communication band 868 MHz

Voltage 230 V AC, 50 Hz

Input power approx. 1 W

Communication range

with JA-80 detectors approx. 300 m

with RC-8x remote controls approx. 50 m

Contact relay load max. 2.5 A/250 V AC total

Safety fuse max. 5 A

Coding digital floating code

Dimensions 76 x 110 x 33 mm (antenna 35 mm)

This product complies with ETSI EN 300220,

ETS 300683, and EN 60950

AC-82 Universal Receiver

UC-82 Output Module

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Comentários a estes Manuais

Sem comentários

YY-Electron Wireless Home Security Alarm System Manual de Serviço Página 15

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso YY-Electron Wireless Home Security Alarm System