
This new compact wireless PIR detector is
giving great performance and less visual impact.
It works with Jablotron’s Oasis alarm system.
It is designed to detect human body movement
over 112 m² of floor space inside buildings. The
detection pattern can be modified by optional
lenses.
Communication band 868 MHz
Voltage 3.0 V lithium battery, type CR123A
Calculated battery lifetime approx. 3 years
(5 min. sleeping mode)
Communication range approx. 300 m (open area)
Detection method dual PIR with digital processing
(2 levels)
Coverage 12 m
Angle 120°
Optional lenses corridor, curtain, pet
Dimensions 85 x 60 x 55 mm
Security grade 2 (EN 50131-1,CLC/TS 50131-2-2,
EN 50131-5-3)
Complies with ETSI EN 300220, EN 50130-4,
EN 55022, EN 60950-1
Wireless Detectors
10
Compact PIR Motion Detector JA-83P
The JA-80P PIR motion detector detects human
body movement inside buildings with many
entran ces. The response is either instant
or delayed. Built-in tamper sensors protect
against unauthorized contact. The detector
performs regular self-testing and regularly
reports to the system for full supervision. As
an option, corridor, curtain and pet lenses can
be used. The JA-80P also provides a wired
input where additional detectors such as
magnetic door detectors can be connected.
The JA-80PB combines the JA-80P PIR motion
sensor with a glass-break sensor in one hous-
ing. Each sensor is enrolled to the control panel
separately. The dual technology glass-break
sensor reacts to air pressure changes followed
sound analysis to ensure a high immunity to
false alarms.
Communication band 868 MHz
Voltage JA-80P - 1x lithium battery AA 3.6 V
JA-80PB - 1x lithium battery AA 3.6 V – PIR
and 1x lithium battery 1/2AA 3.6 V – GBS
Calculated battery lifetime approx. 3 years
(5 min. sleeping mode)
Communication range approx. 300 m (open area)
Detection method dual PIR with digital processing
(2 levels)
Coverage 12 m
Angle 120°
Optional lenses corridor, curtain, pet
Detection range (GBS) up to 9 m
Input for external detectors (IN) NC
Dimensions 110 x 60 x 55 mm
Security grade 2 (EN 50131-1,CLC/TS 50131-2-2,
EN 50131-5-3)
Complies with ETSI EN 300220, EN 50130-4,
EN 55022, EN 60950-1
PIR Motion Detector JA-80P
The detector is used for human motion detec-
tion in the interior of a building. Thanks to
the combination of motion and microwave
detection, the detector is highly resistant to
false alarms.
When motion is sensed by the PIR detector, the
MW detector is activated to confirm the trigger-
ing of the PIR. Only after receiving a confirmed
alarm signal from the MW unit, the detector
sends an alarm report to the control panel.
Communication band 868 MHz
Voltage 1x lithium battery AA 3.6 V
Calculated battery lifetime approx. 2 years
Communication range approx. 300 m (open area)
Coverage 12 m
Angle 120°
Optional lenses corridor, curtain, pet
MW detection range/MW frequency 0.5 to 20 m/9.35 GHz
Dimensions 110 x 60 x 55 mm
Security grade 2 (EN 50131-1, CLC/TS 50131-2-2,
EN 50131-5-3)
Complies with ETSI EN 300220, ETSI EN 300 440-1,
EN 50130-4, EN 55022, EN 60950-1
Wireless PIR / MW Motion Detector JA-80W
Comentários a estes Manuais